• Trio Stealth 10 Tablet Support
• Trio Stealth 10 Tablet Problems
• Trio Stealth Tablet User Manual

I've used Livesuite many times and it tends to be a bit dicey if you don't have the proper USB drivers for the tablet installed in the PC. It sounds like you did have the right drivers only the firmware was/is not packaged appropriately for a proper firmware update via Livesuite. I downloaded cwm successfully on my trio stealth pro 9.7.

Have a Trio Stealth Pro 9.7 that you want to get a little more out of? Download aplikasi instagram for blackberry z3. This guide will teach you exactly how you can root your device! In no time at all you’ll have root access on your Trio Stealth Pro 9.7, which will open the door to endless possibilities.

Disclaimer: This guide is intended as a helpful “how to”. dotTech and its writers are not responsible for any gain or loss (including but not limited to bricked devices) incurred as a result of following this guide. Root your device at your own risk. Rooting may void your warranty. Proceed at your own risk.

Requirements

This root guide is for the Trio Stealth Pro 9.7 running Android 4.0.4 Ice Cream Sandwich. It is specifically for the Trio Stealth Pro 9.7.

Take note this will wipe all your files and data on your phone. Proceed at your own risk.

Before We Begin

In order for your device to register correctly on Windows, download the Trio drivers and install them onto your PC (if you haven’t done so already). The Trio USB drivers can be found at this link.

Your Trio Stealth Pro 9.7 needs to be in USB debugging mode. Go to Settings, then Developer options, and then check the box that says USB debugging.

Trio Stealth 10 Tablet Support

Have your micro USB cable handy.

Download the root package, and extract it to a folder onto the desktop of your PC. The root package can be downloaded from this link.

How To Root Trio Stealth Pro 9.7

• Plug your Trio Stealth Pro 9.7 to your PC via the micro USBcable.
• Double-check that you have USB debugging enabled on your Trio Stealth Pro 9.7
• Navigate to the folder where you extracted the root page to on the Desktop of your PC.
• Find the file called RunMe.bat and execute it. Select normal mode, and follow all the instructions that RunMe.bat gives you. Make sure you read every detail carefully.
• After RunMe.bat finishes what it’s doing on your Trio Stealth Pro 9.7 you’ll have root!

Done!

Trio Stealth 10 Tablet Problems

CONCLUSION

Enjoy a rooted Trio Stealth Pro 9.7.

[via theunlockr]

Scan performed on 4/26/2017, Computer: Aquarius Aquarius Std, Pro, Elt - Windows 7 64 bit

Trio Stealth Tablet User Manual

Outdated or Corrupted drivers:5/18